you're reading...
Aircraft Parts, aviation, FAA, Manufacturing, PMA, Policy

DRAFT Materials Advisory Circular – Extension of the Comment Period

Many of our members have been communicating with us about their concerns over the proposed Materials AC. We had previously asked the PMA community to send us their comments and concerns so we could assemble them into a single missive to deliver to the FAA.

We’ve heard from a number of you that the large volume of material and the highly technical nature of the proposed AC has made it slow going to put together your comments.  With this in mind, MARPA asked the FAA last week for a extension of time to file comments on this draft.

We received the answer today, granting that extension.

Dear Mr. Ryan Aggergaard,

This e-mail is in response to your request to grant a 90 day extension to comment on the FAA public draft Advisory Circular 33.15-3, titled “Parts Manufacturer Approval (PMA) Metallic Part Material Compliance Using Comparative Test and Analysis Method for Turbine Engines or Auxiliary Power Units”.

The FAA will consider comments after the comment period has closed if it is possible to do so without incurring expense or delay.

We have determined there will be no incurring expense or delay, and will grant the MARPA members and the MARPA Technical Committee an extension from July 20, 2016, to October 18, 2016.

Please feel free to contact us if you have any questions or concerns.

Sincerely,

Judith Watson

Please do not wait until October to review this AC and develop your comments.  The earlier you can provide your comments and concerns to the FAA (and to MARPA), the better able we will be to address them in a positive and productive way with the FAA.

Advertisements

About Jason Dickstein

Mr. Dickstein is the President of the Washington Aviation Group, a Washington, DC-based aviation law firm. He represents several aviation trade associations, including the Aviation Suppliers Association, the Aircraft Electronics Association, the Aircraft Fleet Recycling Association and the Modification and Replacement Parts Association.

Discussion

No comments yet.

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: